ICU Bed

Make:  Medical Iberica SA (Medisa);

Model: NEW MILLENIUM

Country of Origin: Spain

Features:-Electrically operatable ICU bed with remote control/touch switch &following:  The ICU Bed Electrically operatable and adjustable for heights, trendelenberg etc.  It be have radio-translucent top for carrying out X-Ray at bed side.  Have four sections with X-Ray translucent back section made.  Have X-Ray cassette holder underneath the back sections with insertion of X-Ray cassette from both side of the bed.  Base/support frame should be made up of stainless steel for prevention of rusting.  Have stepless electrical adjustment of height, back section and leg section etc.  Have a manual quick release mechanism for back section adjustment  Have four sections with X-Ray translucent back section made.  Have stepless pneumatic adjustment for trendelenberg/anti-trendelenberg (-16° + 16°).  Equipped with large castors with central braking& steering facility.  Mattress will be made of high density foam with anti microbial agent incorporated into all components in prohibiting growth of bacteria/fungi & easy to clean.  Have bumpers at all four corners and place for fixing accessories.  Power supply:- 220 V, ±10% 10%, 50 Hz. Accessories:- Should have IV rods-2 nos, articulated half length tuck away side rails-4, Mattress:- 12 cm thick-1 no, nos & other standard accessories for smooth functioning of the unit

ICU Bed (Electric)

Make:  Medical Iberica SA (Medisa);

Model: GALAXY

Country of Origin: Spain

FEATURES

 Epoxy coated steel tube frame. Head and footboard easy to assemble without tools.  Scissor-lift raising system for greater stability and working load up to 230 kg.  4 independent and detachable ABS lying sections. Useful surface 100%.  Bed extension (+- 20 cm). Sliding linen holder and nurse control box storing location.  Radiolucent lying platform with optional backrest cassette holder  Double automatic anti-decubitus regression system to allow a trunk plane regression (11 cm) and leg regression (7cm). The double auto-regression system leaves a clear space for legs and gluteus up to 18 cm. By doing so, the double auto-regression system allows a protection against bedsore.  Sections adjustment accomplished by low tension electric motors, in compliance with standard rule EN 60601-1.  Independent foot angle from knee angle by mechanical activation, providing greater ergonomy.  Cardiac chair position to provide a more comfortable patient stay.  Electric height adjustment  Trendelenburg and reverse trendelenburg by electrical activation.  Centralized braking system and steering facility- Castors Ø150 mm.  5th wheel to allow an easy movement and turn of the bed through narrow corridors and doors .  Nurse control panel and patient handset with drawing and pictograms for an easy use.  Nurse control panel with pre-set functions (Trendelemburg, CPR, cardiac chair and examination position) and lock-out security facility.  Thermoplastic undercarriage cover to protect the bed mechanisms and to allow an easy cleaning.  4 independent ABS side rails in accordance with standard rule EN 60601-2-52.  Quick emergency release backrest dropping system in the event of electrical or battery back-up failure.  Anti-trapping system with automatic motor switch off in the event of detecting any obstacle.  Height adjustment actuator fall-preventer in case of failure.  Complete with supports for accessories (IV drip rod, lifting pole,etc.)  Mattress retainers on both sides to allow a correct lying surface positioning. Technical Specification:  External dimensions : 2150 x 960 mm approx.  Patient surface : 2080 x 870 mm approx  Height adjustment : 430 ±5mm to765 mm ±5mm  Backrest tilting :> 70º  Legrest tilting : > 45 º  Backrest auto regression plane : 110 mm approx.  Legrest auto regression plane : 70 mm approx  Trendelemburg/reverse tredelenburg : ± 16º min.  Maximum working load : 230 kg. Approx  Weight without accessories : 150 kg. approx.  Power supply : 230V 50Hz  Maximum current intake : 1.6A, 3 7 0Volt .  Liquid ingress protection indicator : IP 66  Class protection : Clase l  Electric shock protection : Type B Warranty: 02 (two) Years

Resuscitating Set

Make: Fazzini Sril.

Country of Origin: Italy  

Reusable resuscitation set for both adult and child as follows-

• Silicon resuscitation set for child

• Silicon mask, size 3 & 2

• Silicon bag, 500ml

• Oxygen reservoir 2600 ml

• Peep valve

• Diverter for Peep Valve

• Oxygen tubing (7 ft approx), packed in branded Box/bag

• Guedel Airway, size 0/2/4 Reusable silicone Resuscitator, Adult

• Silicone Mask 5 & 3

• Silicone bag 1600 ml

• Oxygen reservoir 2600 ml,

• Peep valve

• Diverter for Peep Valve

• Oxygen tubing (7 ft approx), packed, in fortune branded box

• Guedel Airway, size 1/3/4

Cardiac Monitor

Model: OMNI III

Make:  Infinium Medical, Inc,

Country of Oriin : USA

Features

 Designed for a fast paced work environment with extremely simple and adaptable user interface. Patient information along with vital sign settings should have capability for quickly modified to meet the needs of a patient’s changing condition.  High resolution minimum 12 inch touch screen  Quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.  Standard measurements of non-invasive blood pressure, ECG with arrhythmia detection, motion tolerant SpO2, Temperature, End-tidal CO2, Invasive blood pressure, Respiration rate and 3 modules of Cardiac Output against 10 monitors (can added on-site by simply attaching plug in modules).  End-tidal CO2, Invasive blood pressure, Cardiac Output & Anesthetic Agent measurement modules can be added on-site by simply attaching plug in modules.  Upgradability to acuity level while the patient’s condition changes. Anesthetic Agent measurement can added on-site by simply attaching plug in modules.  Networking facility to multiple monitors and/or manage patient data on an electronic medical records platform or a HL7 based hospital information system.  Should have Ethernet and RS-232 connections with an open source communication protocol. OxyCRG, drug dose calculation, cascading ECG,  On screen NIPB trends (up to 250 readings),  user set defaults, Arrhythmia detection, ST segment Specification ECG:  Input: 5-lead ECG cable  Lead Choice : I, II, III, aVR, aVF, aVL, V, V1-V6, TEST  Gain Choice : x0.5, x1, x2, x4  Frequency Characteristic : 0.05 ~ 35 HZ (+3dB)  ECG Waveforms : 7 channels  Penetration Voltage : 4000VAC 50/60Hz  Sweep Speed : 12.5, 25, 50 and 100 mm/sec (left to right or right to left)  HR Display Range : 30 ~ 300bpm  Accuracy : ±1bpm or ±1%, whichever is greater  Alarm Limit Range Setting: upper limit 100 ~ 200bpm, lower limit 30 ~ 100bpm RESP  Measure Method : RA-LL impedance  Range : 0 ~ 120 rpm  Accuracy : ±3 rpm  Alarm Limit Setting : upper limit 6 ~ 120 rpm, lower limit 3 ~ 120 rpm  Sweep Speed :12.5, 25, 50 and 100 mm/sec (left to right or right to left) NIBP  Measuring Technology: automatic oscillating measurement  Cuff Inflating : <30s (0 ~ 300 mmHg, standard adult cuff)  Measuring Period : AVE<40s  Mode : Manual, Auto Measuring Interval in  AUTO Mode : 2 min ~ 4 hrs  Pulse Rate Range : 30 ~ 250 (bpm)  Adult/Pediatric Mode: SYS : 40 ~ 250 (mmHg) DIA :15 ~ 200 (mmHg)  Neonatal Mode : SYS: 40 ~ 135 (mmHg) DIA : 15 ~ 100 (mmHg) Accuracy:  Maximum Mean error: ±5mmHg  Maximum Standard deviation: 8mmHg NIBP (continued)  Resolution: 1mmHg  Overpressure Protection : Adult Mode: 300 (mmHg) Neonatal Mode: 160 (mmHg)  Alarm Limit Setting : SYS: 50 ~ 240 mmHg DIA: 15 ~ 180 mmHg TEMP  Range : 25 ~ 50 (°C)  Accuracy: ± 0.2°C (25.0 ~ 34.9°C) ± 0.1°C (35.0 ~ 39.9°C) ± 0.2°C (40.0 ~ 44.9°C) ± 0.3°C (45.0 ~ 50.0°C)  Display Resolution : 0.1°C  Alarm Limit Setting : upper limit 0 ~ 50°C, lower limit 0 ~ 50°C  Channel: 12 Channel Spo2  ASpO2 : Anti-motion SpO2  SpO2% Range : 0-100%  SpO2 Accuracy : ±2% (70 ~ 100%, non-motion) ±3% (70 ~ 100%, motion)  Pulse Rate Range : 30-250 bpm  Pulse Rate Accuracy : ±2 bpm (non-motion ±3 bpm (motion)  Alarm Limit Setting: upper limit 70 ~ 100%, lower limit 70 ~ 100%  SpO2 Probe : Red light LED wavelength 660nm±5nm Infrared light LED wavelength 940nm±10nm IBP  Measurement Range : -50 ~ 300mmHg  Channel : 2 channels  Pressure Transducer : sensitivity, 5µV/V/mmHg  Impedance Range : 300 ~ 3000Ω  Transducer Sites : ART, PA,CVP, RAP, LAP, ICP  Unit : mmHg/kPa selectable  Resolution : 1mmHg  Accurancy : ±1mmHg or ±2%, whichever is greater  Alarm Range : -10 ~ 300mmHg ETCO2  CO2 Measurement Range : 0 ~ 99mmHg  Accuracy : ±2mmHg (0 ~ 38mmHg) 39-99mmHg ±5% of reading +0.08% for every 1mmHg (above 38mmHg)  Sampling Rate : 50 ml/min  Initialization Time : 30 seconds (typical), reaches ±5% steady-state accuracy within 3 minutes.  Respiration Rate: 0 ~ 150 breaths/min  Mode: adult, neonate C.O. (Cardiac output) – total 03 modules for 10 monitors should be supplied.  Measurement Method : Thermodilution Method  Measurement Range : C.O. 0.1 to 20 L/min TB 23 to 43℃ TI 0 to 27℃  Resolution : C.O. 0.1 L/min TB, TI 0.1℃  Accuracy : C.O. ±5% or ±0.1 L/min, which- ever is greater, as measured using electronically generated flow curves. TB, TI ±0.1 ℃(without sensor)  Alarm Range TB 23 to 43℃  Repeatability : C.O. ±2% or ±0.1 L/min, which- ever is greater, as measured using electronically generated flow curves Power  Source : External AC power or internal battery  AC Power : 100 ~ 240VAC, 50Hz, 150VA  Battery : Built-in & rechargeable lithium ion  Operating Time : 3+ hours

Defibrillator

Make:  Shvabe‑Zurich GmbH

Model: DFR-02UOMZ

Country of Orgin :  Switzerland

The Defibrillator unit should have the following features as below:- • Portable Defibrillator unit with Built-in Printer. • Monitor Size: Minimum LCD Display 120x30mm with adjustable contrast. • Electromagnetic Deflection Type. • Alphanumeric Display: ECG, Heart rate, ECG Lead, Charge Rate etc. • Star Biphasic Technology with Max. 5-200 joule Patient impedance. • Energy Setting: AED # 5-200 (8 Level) joule or according to configuration menu. • Selectable energies: with external defibrillator pad : 5-200 joules in 12/15 steps. • Energy available : Automatic disarms after 12 sec. • Synchronization defibrillator with internal QRS synchronization. • Synchronization shock delay: typically 40Ω (<60 ms) from QRS peak • Discharge timing : <30 min. after the discharge. • Max. charge/discharge frequency: 3 cycles/min. • Battery Operation : 2 hours (approx). • Recorder paper speed : 25, 50 mm/s • Automatic Recording : Defibrillation & alarm recording. • Manual Recording: Real time/delay, ECG & pulse waveform, report, trend & event facilities recording. • Power Supply:220volts±10%,50Hz. Accessories: External Paddle (Adult & Pediatric) - 01 Set, Power Cable, ECG Lead - 01 pc, ECG Paper Roll - 04 pc, Stat-Padz (Electrode for Pacing, Cardioversion, ECG Monitoring & defibrillation) - 01 pc, One-Step Electrode, for Defibrillation, Pacing, ECG, Cardio version & CPR (Disposable) - 1 Box (8 pcs) Operator's Manual - 01 pc and all Standard accessories should be mentioned for functioning.

Skin Expansion -System (Mesher)

Make: Nouvag AG

Country of Origin: Switzerland

Easy to clean due to hinged bridge for opening

Access to blade roll

High grade medical stainless steel

Light weight, only 10 lbs. (4.5kg)

Adjustable backing roll

Wide range of Mesh-boards available

Skin sections are gathered together with the Dermatome and perforated by using the Mesher in addition to the mesh board. Hence the skin is protracted like a chain-link fence. The enhanced surface of the skin spares the patient further skin removals. The intermediate spaces of the grafted and meshed skin builds up at the healing process of the skin.

Mesher carrier plates - 20 sterile pieces per box. Ref. 16.1981 - Expansion factor 1.5:1 Ref. 16.1982 - Expansion factor 3.0:1 Ref. 16.2105 – Expansion factor 6.0:1

Infant Meter/Steadiometer

Model: 8450

Make:  CARDINAL SCALE MFG CO

Country of Origin: USA

Dimensions 13.75 to 31.5" / 35 to 80 cm Power Source Two 1.5V AAA batteries

Suction pump digital LCD

Model: F-60.00 / F-90.00

Make: Fazzini Srl.

Country of Origin: Italy

Mobile suction machine for professional use, with powerful double piston motor. ABS anti-shock case. Four antistatic castors, two of which with brakes. Vacuum gauge for the control of vacuum.Vacuum regulation. Two jars, 2 lt. capacity made of Makrolon autoclavable. Each jar with double security valve. Indipendent use of each jar. Supplied with disposable filter and set of tubes. TECHNICAL SPECIFICATIONS Motor: Maintenance-free Oil free piston pump Weight: 12 kg/14.5 Power supply : 230V/50-60Hz (0,260A)/0.93A Power consumption: 60 W/200W Suction power: 70 l/min/90l/min Max vacuum : maximum 0,80 bar - 600 mmHg / -75 kPa/ 0.80bar-675mmHg Operating cycle: 60min ON / 30 min OFF Noisiness : 61,2 dB/62.3dB

Laparoscopy

Make: TEKNO-MEDICAL Optik-Chirurgie GmbH

Country of Origin: Germany

Features:- Laparoscopy system with instrumentation for general surgery:- Pneumoperitoneum Needle with spring loaded blunt stylet LUER-lock, length 12cm. ( Tk 704-082) • Trocar with pyramidal tip size, 11mm Cannula with and multifunctional valve and insufflations , stop-cock ,length 10.1cm (Tk 704-375) • Trocar with pyramidal tip size 5.5mm with Cannula and multifunctional valve and insufflations stop-cock ,length 9.5cm- Reducer 1 l/5.5mm. (Tk 704-370 & 704-235) • Reduction Sleeve, reusable, instrument diameter 5mm, trocar cannula O.D.5.5 mm/O.D. 11 mm. (Tk 704-000) • Straight forward Telescope 0°, enlarged view, diameter 10 mm, length 31mm, autoclave able. Fiber Optic light transmission should be incorporated. (Tk 700-020) • Reddick-Olsen dissecting and grasping forceps, insulated, size 5mm, length 33 cm and with double action jaws. (Tk 775-4095 CS) • KELLY dissecting and grasping forceps, insulated, size 5mm, length 33 cm and with double action jaws and forceps insert. (Tk 775-4094CS) • Dissecting and Grasping Forceps, 2x4 teeth insulated , with ratchet size 5mm length 33 mm and with double actions jaws. (Tk 775-4065 CS) • Reddick-Olsen dissecting and grasping forceps, heavy, insulated, size 5mm, length 33 cm and with double action jaws and ratchet. (Tk 775-4081 CS) • METZENBAUM scissors, rotating, with connector for uni-polar coagulation 5mm, length , 33cm,blades curved, double action jaws, length of blades 12 mm. (Tk 775-4023 C) • Hook Scissors, rotating, size 5mm, length 33cm,single action jaws (Tk 775-4020C) • Coagulating and Dissecting Electrode, L-shaped, with connector pin for uni-polar coagulation size 5mm, length 33 cm. (Tk 706-156) • Applier for ligating clips (medium large) dismantling, rotating with ratchet to lock the jaw part holding the clip. (out Sourcing) • Pilling-Titanium-Clips, medium-large, sterile box with 16 cartridges, 10 clips each (out Sourcing) • Electronic C02 Endoflator, C02 bottle empty, (Tk 754-1512) • High Frequency Surgery Unit, power supply: (Tk 90011-02 & 90010-50) 220 V, ±10% , 50 Hz. • C02/ N20 gas filter for use with Electronic Endo flator(Out Sourcing) A Mains Cord Adaptor, bipolar HF- output, 4 mm (Tk 707-332) HSMP Armenia Equipment & Furniture Component HPIU: HH equipment specificationsf Connecting Cord, for connecting the neutral electrodes (including Neutral electrode plate) Neutral-Electrode made of conductive silicone, withl rubber strap for fastening contact face, surface area approx. 120x250mm. (Tk 90029-00 & 90029-50) Two-Pedal Footswitch, for control of coagulation. (Tk 90016-00) Monopolar High Frequency Cord with 5 mm plug for HF-unit, length 300cm (Tk 707-520) Suction Machine with Bottle, 1.5L.Bacterial filter (out Sourcing) Cold Light Xenon Fountain: 180 W power supply: 220-240 VAC, 50 Hz (tk.754-XM180), Fiber Optic Light Cable, size: 4.8 mm, length 180 cm (tk. 39533-18) Endoscopic video system:- (tk.754-2130R & 754-3900-25) Color system PAL , Sensor: 1x1/3” High Sensivity CCD Pixel: 752x582 (PAL) Resolution: > 470 lines Sensitivity : 1 lux Cover for use with endoscopic video cameras, size approx 17 x 242 cm, rolled up. (out Sourcing) Color Monitor, color system PAL, NTSC (Out sourcing locally Supplied) Power supply: 220- 240 VAC, 50 Hz. Mobile cart for video system: 4 antistatic dual wheels, 2 equipped with locking brakes, 2 fixes shelves, 1 drawer unit with lock, 1 set (Out sourcing locally Supplied) of non-sliding stands for units, inclusive integrated small cable conduit in both vertical boom, 1 camera mount. Power Box socket board with 12 plugs, 12 grounding plugs Approximate Dimensions: cart: approx 700mm x 1280mm x 686mm (wxhxd) Shelf 630mm x 480mm (wxd) caster diameter: 125 mm (Out sourcing locally Supplied) Standard Accessories should be provided with two spare Xenon bulbs. (tk 754-R180)

Isolation Unit

Model: RC100 or RC200.

Make: MedicCleanAir® technology

Country of Origin: Belgiam

This Isolation Unit is made for installation in suspended or false ceilings, and walls. Can be connected to an existing ventilation system or new tube system. Reccommended for isolation rooms up to 12m2 / 30m3. Depending on the installation, positive (for immune-compromised) or negative (for infectious patients) pressure is generated inside the room (easily up to 20 Pascal). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured.

Vital Sign Monitor

Model: OMNI II

Make: Infinium Medical, Inc

Country of Origin: USA

Features • Designed for a fast paced work environment with extremely simple and adaptable user interface. Patient information along with vital sign settings should have capability for quickly modified to meet the needs of a patient’s changing condition. • High resolution min 10 inch touch screen • Quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data. • Standard measurements of non-invasive blood pressure, ECG with arrhythmia detection, motion tolerant SpO2, Temperature, and Respiration rate. • Upgradability to acuity level while the patient’s condition changes. End-tidal CO2, Anesthetic Agent measurement, Cardiac Output and Invasive blood pressure can added on-site by simply attaching plug in modules. • Networking facility to multiple monitors and/or manage patient data on an electronic medical records platform or a HL7 based hospital information system. • Should have Ethernet and RS-232 connections with an open source communication protocol. OxyCRG, drug dose calculation, cascading ECG, • On screen NIPB trends (up to 250 readings), • user set defaults, Arrhythmia detection, ST segment Specification ECG  Input: 5-lead ECG cable  Lead Choice : I, II, III, aVR, aVF, aVL, V, V1-V6, TEST  Gain Choice : x0.5, x1, x2, x4  Frequency Characteristic : 0.05 ~ 35 HZ (+3dB)  ECG Waveforms : 7 channels  Penetration Voltage : 4000VAC 50/60Hz  Sweep Speed : 12.5, 25, 50 and 100 mm/sec (left to right or right to left)  HR Display Range : 30 ~ 300bpm  Accuracy : ±1bpm or ±1%, whichever is greater  Alarm Limit Range Setting: upper limit 100 ~ 200bpm, lower limit 30 ~ 100bpm RESP  Measure Method : RA-LL impedance  Range : 0 ~ 120 rpm  Accuracy : ±3 rpm  Alarm Limit Setting : upper limit 6 ~ 120 rpm, lower limit 3 ~ 120 rpm  Sweep Speed :12.5, 25, 50 and 100 mm/sec (left to right or right to left) NIBP  Measuring Technology: automatic oscillating measurement  Cuff Inflating : <30s (0 ~ 300 mmHg, standard adult cuff)  Measuring Period : AVE<40s  Mode : Manual, Auto Measuring Interval in  AUTO Mode : 2 min ~ 4 hrs  Pulse Rate Range : 30 ~ 250 (bpm)  Adult/Pediatric Mode: SYS : 40 ~ 250 (mmHg) DIA :15 ~ 200 (mmHg)  Neonatal Mode : SYS: 40 ~ 135 (mmHg) DIA : 15 ~ 100 (mmHg) Accuracy:  Maximum Mean error: ±5mmHg  Maximum Standard deviation: 8mmHg  Resolution: 1mmHg  Overpressure Protection : Adult Mode: 300 (mmHg) Neonatal Mode: 160 (mmHg)  Alarm Limit Setting : SYS: 50 ~ 240 mmHg DIA: 15 ~ 180 mmHg TEMP  Range : 25 ~ 50 (°C)  Accuracy: ± 0.2°C (25.0 ~ 34.9°C) ± 0.1°C (35.0 ~ 39.9°C) ± 0.2°C (40.0 ~ 44.9°C) ± 0.3°C (45.0 ~ 50.0°C)  Display Resolution : 0.1°C  Alarm Limit Setting : upper limit 0 ~ 50°C, lower limit 0 ~ 50°C  Channel: 12 Channel Spo2  ASpO2 : Anti-motion SpO2  SpO2% Range : 0-100%  SpO2 Accuracy : ±2% (70 ~ 100%, non-motion) ±3% (70 ~ 100%, motion)  Pulse Rate Range : 30-250 bpm  Pulse Rate Accuracy : ±2 bpm (non-motion ±3 bpm (motion)  Alarm Limit Setting: upper limit 70 ~ 100%, lower limit 70 ~ 100%  SpO2 Probe : Red light LED wavelength 660nm±5nm Infrared light LED wavelength 940nm±10nm Networking  Industry standard 802.11b/g wireless network Power  Source : External AC power or internal battery  AC Power : 100 ~ 240VAC, 50Hz, 150VA  Battery : Built-in & rechargeable lithium ion  Operating Time : 3+ hours

500mA & 800mA X-Ray

Make: PROTEC GmbH & Co. KG

Country of Origin: Germany

500mA medical xray equipment price (PLD5000B ) x ray machine is as same as x ray unit. This x ray machine is also called medical x ray system. The x ray machine is 500mA x ray equipment. Usage of 500mA medical x ray equipment This x ray equipment must only be operated by the professional who has necessary radiation knowledge and has got medical professional training. This x ray machine is used to photograph patient's esophagus, chest, gastrointestinal, abdomen, limbs etc for common radiography, Beam Limiting Device radiograph and high KV radiography. Technical parameters of 500mA medical x ray equipment Power Output 40KW(max) 20KV(min) Frequency 50HZ±1Hz Voltage 380V ± 38V X-ray Tube Rotary anode Commute Method Full Wave Commutation

Any Conventional X-Ray

Make: PROTEC GmbH & Co. KG & Italray S.r.l

Country of Origin: Germany & Italy

Medical imaging modalities, for example, includes magnetic resonance imaging (MRI), ultrasound, medical radiation, angiography and computed tomography (CT) scanners. In addition, to several scanning techniques to visualise the human body for diagnostic and treatment purposes. Also, these modalities are very useful for patient follow-up, with regards to the progress of the disease state, which has already been diagnosed, and/or is undergoing a treatment plan. The vast majority of imaging is based on the application of x-rays and ultrasound (US). These medical imaging modalities are involved in all levels of hospital care. In addition, they are instrumental in the public health and preventive medicine settings as well as in the curative and further extending to palliative care. The main objective is to establish the correct diagnoses.

CR System

Make: PROTEC GmbH & Co. KG & Italray S.r.l

Country of Origin: Germany & Italy

We are renowned organizations of market for presenting the optimum quality range of CR System, which is extremely employed in the industry. Product Specification Weight(Kg) 34 kg Dimensions (W x D x H) 1656 x 1456 x 874 mm Display size 15x15 inch Power AC 120 - 240 V Time to Start on Display Min. 33 sec. Frequency 50-60 Hz Temperature 15-30 Degree Celsius Humidity 15-80% RH Atmospheric Pressure 750-1060 hPa Minimum Order Quantity 1 Set

Digital Mobile X-Ray

Make: PROTEC GmbH & Co. KG & Italray S.r.l

Country of Origin: Germany & Italy

Digital Mobile X-RAY machines – including GC85A and GM85 – incorporate S-Vue 3.02, which provides spatially adaptive multi-scale processing and advanced de-noising technology, delivering quality images with a fraction of the dose.

Digital Radiography (DR)/X-ray

Make: PROTEC GmbH & Co. KG & Italray S.r.l

Country of Origin: Germany & Italy

Mammography Unit

Model: MAMMOGRAPH

Make: Italray S.r.l & IDETEC MEDICAL IMAGING

Country of Origin:  Franch & Italy

System must have following Features: High Frequency Dual Power Generator. High Speed bi-angular X-ray tube. Dual Focus 0.1/0.3mm. 65 cm SID provides finger details and large. Integrated dual filter. AEC with auto KV KV based on tissue. Microprocessor Dual Control Panel control. Auto Release Function Automatic or manual compression release Compression force, breast thickness and angulations digitally on the third display on the base Microprocessor control internal diagnostic Density fine tuning with 11 steps. 16 film /screen fully programmable PHTM 9000 solid state. Automatic expose control, compression device available. Printing facilities Technical Specification: Generator:  Power Output: 3 kW or more  High Frequency Generator. Tube:  Rotating Anode with Molybdenum target material  Focus sizes: 0.3mm/0.1mm min  Anode Type: Rotating anode  Anode Thermal Capacity: 300KHU or more  Filter: Molybdenum/AI or Automatic  KV Range: 20 to 35 KV min  mA Range: 35 to 135 mA min  mAs Ranges : 6 to 600 mAs min  Bucky Grid Sizes: 18cm x 24cm & 24cmX30cm min  Grid Ratio : r5  Grid Line per cm : N36  Focusing Distance ; f65  AEC : PHTM 9000 Solid state ( 9 activ sensors) 11 steps 0+-5 programmable with Pc.  Film : 16 Film/Screen fully Programmable C-Arm:  C- arm Rotation : +-180 Degree  Vertical Movement ; Motorized movement 42.8 cm to 127.8 cm with std arm.  SID : minimum 65cm Standard Accessories: Lead Apron : 3 Nos. Online UPS for 20 min back up or more ; 01 No. Magnification Kit for 1.8 x magnification Foot Switch Compression plate CR cassette with Mammo with screen – 2 nos (18x24cm & 24x 30cm) AC 2 ton ; 1 No De Humidifier 20 liter; 01 no Half Transparent Anti X-ray Screen protection shield glasses – 01 No Dry Laser Imager with Mammo Option : 01 No.

Mobile X-ray 80,150,300 & 425mA

Model: CORSIX R 32

Make: Italray S.r.l & IDETEC MEDICAL IMAGING

Country of Origin: Franch  & Italy

Features & Facilities: Mobile radiography unit and easy transport for use in the general purpose, intensive care, children, accident and x-ray wards. Features must be as below with the system. Microprocessor Control High Frequency x-ray Generator . Display of Preset kV and mAs Pre-programmed up to 240  anatomical techniques (APR) Touch Screen LCD console. Manual Driven Light Beam collimator. X-ray Arm Rotation +-90˚ facilities. X-ray collimator Rotation +-180˚ facilities Should have safety facilities for Filament current, Maximum exposure time, Maximum Temperature of X-ray tube head, Count thermal units of X-ray tube head, Anode rotation, Microprocessor self – test.    Technical Specification: Generator: High Frequency x-ray generator. Power output: 32 KW or more Inverter Frequency: 100 KHz or more mA Rating: 20- 425 mA at 125KV or more Radiographic tube Voltage: 40kV ~ 125kV in steps or more mAs Range: 0.2 ~ 220 mAs (27 in steps) Radiographic tube Voltage: up to 130KV or more Ripple: Not more than 3% at max power. X-Ray tube: Rotating speed anode tube with double focus Small focus: 0.6mmx0.6mm (11 kW)and 1.3mmx1.3mm(32 kW) Anode Rotation: Min. 3000 rpm Tube voltage: 130kV or more. Anode heat storage capacity: 107 KHU or more Operation and Service manual should be supplied with each machine Electrical Characteristics: Power Supply: Single phase 180VAC – 260VAC, 50Hz

Multifunctional DR & DRF System

Make: Italray S.r.l & IDETEC MEDICAL IMAGING

Country of Origin: Franch  & Italy

X-Ray Film Processing

Model: OPTIMAX

Make: PROTEC GmbH & Co. KG

Country of Origin: Germany

Lightweight yet rugged tabletop processor 90 second processing speed, leading edge to leading edge

Energy and water saving design limits run time to when film is actually being processed

Anti-oxidation and anti-crystallization programs result in chemical savings and outstanding image quality

Intelligent replenishment sensor limits chemical use resulting in chemical savings

All components are easily accessible underneath for service

Temperature control on the front panel for ease of use

Top film feed and top return for convenience

Film transport rack design with spring loaded rollers helps eliminate film jam problems found with other brands

Quality polyurethane & rubber rollers for outstanding image quality and no artifacts

 2 year warranty

Standard Equipment

Comes complete and ready with all components for tabletop processing

Levelling legs for uneven surfaces

Spare parts kit

 6.6 gallon (25 liter) replenishment tanks with filtering replenishment straws

 Floating lid for developer tank

 Water supply hose

 Tubing and hardware

 Installation, Operating and Parts Manual

Options

220V, 50/60Hz service for international

Basic or Deluxe stands

No Plumbing Kit for closed loop operation

Thru-the-wall construction

Silver recovery bucket

Mammography version

X-Ray-300,630,800,1000mA

Make: PROTEC GmbH & Co. KG,  Italray S.r.l & IDETEC MEDICAL IMAGING

Country of Origin: Germany , Franch & Italy

Cardio Pulmonary diagnostic System

Make: GANSHORN MEDIZIN  ELECTRONIC  GMBH”

Country of Origin: Germany

Complete assessment for the differential diagnosis and sportsmen condition evaluation

YOUR ADVANTAGES

*   MAINTENANCE FREE - ultrafast and long-life CO2 sensor.

*   DO IT YOURSELF - O2 sensor can be changed within a minute and without a technician.

*   GOLD STANDARD - In full compliance with the ATS recommendations.

*   FLEXIBILITY - Analysis of the results in a prefered way - 9 panel Wassermann diagram or individual setup of graphs.

*   USER-FRIENDLY - Automatic determination of anaerobic threshold by set method or manually.

TECHNICAL DATA

FLOW-MEASUREMENT

·   Principle              : Pneumotach       (variable                orifice)

·   Range                  : 0-20 l/s

·   Accuracy            : ±2%

·   Resolution          : 0,01 l/s

VOLUME-MEASUREMENT

·   Principle              : Digital Integration

·   Ventilation         : 300 l/min

·   Accuracy            : ± 2%

O2 MEASUREMENT

Principle :  Chemical Cell

Range : 10 to 45% O2

Resolution:  0.01% O2

Rise time : 80 ms

Accuracy : ± 0.1% O2

O2 MEASUREMENT

Principle :  Ultrasound

Range : 10 to 15% CO2

Resolution:  0.01% CO2

Rise time : <80 ms

Accuracy : ± 0.1% CO2

ELECTRICAL REQUIREMENTS

·   Power Consumption: Max. 30 VA

·   Voltage               : 24V

·   Frequency          : 50 to 60 Hz

POWERCUBE ERGO

Technical specifications

FEATURES

*    12 CHANEL ECG

- Use a full 12 chanel stress ECG or a pulse belt for sports application.

*    NON-INVASIVE MEASURING

- The only non-invasive method of measuring cardiac output.

*    PATIENT MANAGEMENT

- Easy patient management handling due to a shared database with other GANSHORN products or due to a full integration into SCHILLER SEMA.

ADMINISTRATIVE PROGRAMS

SQL Database                    

·    Report Generator                           

·    Multiuser license                            

·    User Predicted Values                   

·    GDT data transfer                         

·    HL7 Interface                

·    DICOM                            

·    Worklist                           

MEASUREMENT PROGRAMS & FEATURES        

·      Ergospirometry                               

·      Forced Spirometry/Flow-Volume               

·      Slow Spirometry                             

·      Offline Input of bloodgases (e.g. lactate)                  

·      MVV (Maximal Voluntary Ventilation)                    

·      Cardiac Output                              

·      Calorimetry                     

·      SpO2                

·      12-channel stress ECG                  

·      Polar pulse belt                               

·      Blood pressure measurement                      

·      Ergometer                        

·      Treadmil                          

·      Evaluation Software LFSport     

Quality Standards

·   Quality Management :  ISO 13485

·   FDA : 510(k) market clearance!*)

·   MDD 93/42/ECC :  CE Marked

·   Electrical safety :  EN 60601-1 (Third Edition)          

FENO  Spirometer

Model: Vivatmo Pro

Make: GANSHORN MEDIZIN  ELECTRONIC  GMBH”

Country of Origin: Germany

§ Smart and ergonomic design

§ Leightweight and wireless handheld

§ Bluetooth connection with base station

§ Touchscreen enables interaction, control¬ling and monitoring

§ Inductive battery charger

§ Supports HL7 interface

§ Long lifetime

§ Adjusted to high measurement frequency

§ Easy handling due to intelligent user guidance

§ Intuitive usage by mouthpieces inspired by the shape of a flute

FeNO (fractional exhaled nitric oxide) is a biomarker for eosinophile airway inflammation and reflects the inflammatory activity of allergic bronchial asthma.

The quick, painless and noninvasive analysis method is a reliable way of  monitoring allergic airway inflammation in asthma patients.

Studies verify the importance of FeNO measurement in delivering diagnosis confirmation and a prognosis of response to treatment with inhaled corticosteroids (ICS).

Oscillometry  Spirometer

Model: Airwave Oscillometry CS-100

Make: GANSHORN MEDIZIN  ELECTRONIC  GMBH”

Country of Origin: Germany

The tremoflow Airwave Oscillometry System (AOS) is a portable medical device intended to monitor lung function and assess human respiratory diseases such as asthma and COPD in adults and children. The device produces measures of airway resistance, reactance and other lung function parameters to assist physicians in diagnosis, treatment selection and evaluation of treatment efficacy. The principle technology of the AOS is based on a compact implementation of the Forced Oscillaton Technique (FOT), a non- invasive technique that assesses lung function by superimposing a multi-frequency airway on top of the patient‘s spontaneous breathing.

-       No specific manouvre needed - just tidal breathing

-       Easy to use and very fast

-       Reversability and provocation testing

-       Suitable for geriatric and pediatric use

-       Semi-automatic calibration in less than 30 sec

-       Compact and portable

Early detection of peripheral airway impairment

§ Obstructive pulmonary diseases including asthma and COPD are increasingly recognized to originate in the “small airways” (i.e., those airways with a diameter of less than 2 mm). Early obstructions in these peripheral airways are oft en not measurable only by spirometry and therefore risk going undetected. Oscillometry has been shown to be sensitive to changes in the small airways. Consequently, oscillometry provides unique and valuable information regarding peripheral lung function over and above spirometry, which translates into better patient outcomes.

§ Ressent studies: combination of spirometry and oscillometry are superiorAs the study by the Scottish Centre for Respiratory Research (published in 2022) shows, it is best to combine the advantages of spirometry and oscillometry measurements. This combination allows a complete characterization of airfl ow limitation in moderate to severe asthma. GANSHORN off ers these advantages exclusively. Its unique product portfolio allows the combination of ultrasound spirometry with SpiroScout, oscillometry with Tremofl o and to show results in one soft ware and one report. Thanks to its network interfaces LFX also off ers the possibility of sending all results from the devices easiely via GDT or HL7. The usability of the soft ware makes reportings and data export quick and easy.

Advantages for children and eldery

§ Anecdotal evidence from numerous clinicians reveals that even for COPD patients for whom spirometry is not explicitly contraindicated, the test is stressful and exhausting. A typical geriatric spirometry test can last 30 minutes. Moreover, there is a risk of false positives due to a change in underlying bronchomotor tone aft er repeated forced expirations.

§ Successful spirometry depends on patient cooperation and maximal eff ort, the success of a test is severely jeopardized in patients who have diffi  culty in understanding and following instructions, including young children, and those with language barriers or mental impairments.

§ As oscillometry is performed in tidal breathing, neither skilled coaching by the operator nor patient eff ort is required to obtain a successful test.

The importance of small airways

·   The small airways are frequently involved early in the course of asthma and COPD diseases, with signifi cant pathology demonstrable oft en before the onset of symptoms or changes in spirometry and imaging.

·   Peripheral airway impairment may be clinical- ly relevant at all levels of asthma severity and control.

Airwave oscillometry  

To assess respiratory function, the tremofl o adds a gentle oscillatory wave to the patient’s regular, quiet breathing. A short measurement duration of only 20 seconds allows three manouveres within a couple of minutes, even in patients who have difficulty performing spirometry.

Oscillometry outcomes

A pair of two curves calculated from the raw data refl ects the mechanical properties of the respiratory system in characteristic patterns. Several key outcome parameters are then derived from these curves.

·                         The  resistance curve shows to refl ect central and peripheral airways.

·                         The  reactance curve shows to refl ect elasticity and peripheral airways.

Key Outcomes

^·          Resistance at 5 Hz ¹

^·          Resistance change, 5 to 20 Hz ¹

^·          Reactance area ¹

Technical Data

·      Measurement Principle :  Oscillometry (Forced Oscillation Technique, FOT)

·      Oscillator Technology :  Breathe-through Vibrating Mesh (Patented)

·      Measurement Modes :  AOS: Pseudo-random noise

·      Measurement Duration : 20 sec, user adjustable 3 repetitions (as per guideline)

·      Patient Interface :  Bacterial/viral fi lter with integrated mouthpiece

·      Performance :  Meets and exceeds ERJ 2003, 22: 1026-1041

·      Marks & Licenses:  Health Canada, CE Mark, ARTG

Ultrasonic Desktop Spirometer

Model: SpiroScout

Make: GANSHORN MEDIZIN  ELECTRONIC  GMBH”

Country of Origin: Germany

The FIRST full pulmonary function system with Ultrasound Technology

§ Highly accurate, ultrasonic flow sensor

§ Lowest cost per test in the industry

§ Powerful, user-friendly LFX software

§ Compact and portable to perform tests anywhere

§ Calibration and maintenance-free

§ Ultra-fast and reliable

§ Upgradeable analysis packages for:

-          Tidal Breathing Analysis

-          Rocc (Resistance by Occlusion)

-          Capnovolumetry

The Ganshorn SpiroScout is much more than just a spirometer. It enables the diagnostic capabilities of a complete pulmonary function system. With its unique ultrasound technology implementation at 1000 pulse sample pairs per second, the SpiroScout also enables gas concentration measurements to expand its diagnostic capabilities without the need for a gas analyzer or calibration gases.

LFX Software

The LFX Software is our user-friendly interface, developed with the technologist in mind.

The Patient Management interface provides all the tools necessary to perform every task done in the laboratory, while remaining easy to operate. Built on state-of-the-art Windows tools like .Net, C# and SQL database, the LFX Software is the future of modern respiratory diagnostics

Quality Control

The LFX Software has built-in quality control monitoring based on ATS/ERS guidelines, which are accessible during and after the measurements are performed.

Ultrasound Technology

The SpiroScout is the heart of all Ganshorn diagnostic systems. The SpiroScout, when used in the PowerCube Body+ (Body Plethysmograph} or PowerCube Diffusion+ systems, brings this patented technology with its precise and direct digital sound pulse transit-time flow determination to every measurement of lung function. Every system, every measurement, always the same accuracy and precision

Connectivity

The LFX Software connectivity infrastructure includes networking and EMR interface solutions. The advantage of Ganshorn's connectivity solutions is that they were developed internally (not outsourced). This gives Ganshorn the ability to provide customized interface solutions that meet the laboratory's exact needs.

Forced Spirometry — Measurement Mode

Measurement Programs 

·    Slow Spirometry                             

·    Forced Spirometry/Flow-Volume               

·    MVV                

·    Tidal Breathing Analysis                              

·    Rocc (Resistance by Occlusion)                  

·    Capnovolumetry                           

·    Provocation Testing (PD20 calculation)    

Administrative Programs

SQL or MySQL Database

Report Generator

Multiuser License

GDT Data Transfer

HL7 Interface

Worklist

DICOM

Spirometer, Resistance, PC System

Make: Ganshorn Medizin Electronic GmbH Schiller Group

Country of Orgin: Germany

Hardware Options

Tidal Breathing Analysis (for Pediatrics)

Customizable Reports

LFX software comes standard with a large library of default reports.

Additionally, the Report Generator application gives laboratories the ability to customize all of their spirometry reports.

Rocc Resistance by Occlusion

Technical Specifications

Flow Measurement Module

Principle:  Ultrasound Transit Time

Range:0 to ± 18 L/s

Accuracy: ± 2%

Resolution: 0.001 L/s

Volume Measurement

Principle:  Digital Integration

Range: No Limit

Accuracy: ± 2%

Resolution: 1mL

Physical Specifications

Size:18 cm x 9 cm x 9 cm (W x H x D)

Weight:1000 g (ScoutSensor: 185 g;

Base station: 730 g; Cable: 85 g)

Breathing Insert

Breathing Resistance: 0.002 kPa/L/s

Dead space, Complete: 18 mL (Pediatric inlet available)

Material: Polyethylene

Computer Interface

Data Transfer to PC: USB 2.0

USB Connection: Connector A - Connector B, Double shielded, 2x AWG24

Power Supply

Standard: Powered via USB 2.0 Voltage 4.5 to 5.25 V DC 500 mA

Option: External AC Adapter

Minimum System Requirements

Operating System: Processor:  Windows 7, 8, or 10 Intel Core 2- or AMD Athlon- Processor with 64 Bit, 2 GHz or faster processor

Interface: RS232, USB 2.0 or 3.0

Screen Resolution:  1366x768 pixel display with 16-bit color, 512 MB of VRAM (1 GB recommended)

Hard Disk Capacity: 20GB of available hard disk space for installation

RAM (With SQL Server): 4 GB (8GB recommended)

RAM (Only LFX Client): 2GB (8GB recommended)

MS SQL Server: 2008 R2 or higher or MySQL 5.7 or higher

Images may show optional configurations.

Technical changes and improvements, especially to the PC and printer, as well as the availability of the listed devices and options may be subject to change.

Quality Standards

·   Quality Management :  ISO 13485

·   FDA : 510(k) market clearance!*)

·   MDD 93/42/ECC :  CE Marked

Electrical safety :  EN 60601-1 (Third Edition)            

Automatic stainer

Model: SDSGT9000

Make: Diapath S.p.A. 

Country of Orgin: Italy

Automatic stainer for histological, cytological and histochemical stainings on slide, ideally suited for Anatomic Pathology labs. The flexibility of the software and reliability of manufacture, Giotto is suggested for both small and big routine, ensuring staining quality invariably outstanding and reproducible. Technical features Dimensions (WxDxH): 1040x620x770 mm Weight: 95 kg Overall reservoirs : 40 Reservoir capacity: 450 ml

Autopsy tables

Model: TR2907

Make: Diapath S.p.A. 

Country of Orgin: Italy

Pedestal autopsy table with automatic elevating mechanism of the table top Ventilated table suitable for autopsy. - New design - Reliable and long-lasting due to the attention of the manufacturing materials - Made of AISI 316/304 stainless steel - Ergonomic and accessible from both sides - Table top made of AISI 316/304 stainless steel with perforated and removable grid plates - Waste drain basin under the table top with automatic washing system - Great perimeter ventilation system to protect the operator from harmful fumes and odours - AISI 3016/304 stainless steel sink hot/cold faucet with clinic lever mixer - Two extractable multijet showers heads, to wash the table top area from both sides - Filtering battery expiration date control through RFID technology - Color LCD display 4.3” with user-friendly software - with automatic lifting system of the working plane Dimensions:2880x850x865-1065 mm (WxDxH)

Baby Bottle Warmer

Make: Barkey

Temperature control the dry way because of hygiene! A hygienic necessity Dry, germ-free handling is hygienically necessary when pasteurising breast milk. The Barkey clinitherm pasteur XPT heating device is a safety dry temperature regulation device for warming and pasteurising breast milk in order to avoid CMV transmission. The breast milk is subsequently perfused or given as foodstuff using a baby bottle. The pasteurising procedure is safely guaranteed under the conditions of warming the breast milk up to + 63 degrees Celsius and keeping it at this temperature for a period of 30 minutes. This method of pasteurisation without water at consistent temperature conditions guarantees repeatable, comparable and hygienic conditions through the monitoring of the temperature in the reference sample and adherence to the duration. Cooling down to a defined temperature can be achieved simply and inexpensively through the use of a freestanding cooling block, or completely automatically using an external re-cooler. The technology used in this case requires no external water supply whatsoever. The risk of contamination as found in using hot water, for example through the transmission of germs into the bottles, screw connections, user's hands via the water, or the dissolving of labels, is avoided safely through the drive temperature control used in the Barkey breast milk pasteuriser. The devices require little space and no special installation except a mains supply.

Biohazard safety cabinet

Model: BIOBAN 48

Make: Angelantoni life science srl

Country of Origin: Italy

BIOBAN 48 Class II biohazard safety cabinet (EN12469) without internal worktop Working area dimension: Width: 1.188 mm Depth: 500 mm Height: 650 mm Technical Specification: Back panel in stainless steel AISI 304L "2B" finishing, thickness 12/10. Working surface in stainless steel AISI 304L "2B" finishing, divided in sectors removable and autoclavable (4 sectors), available both in perforated and solid version. Sidewalls in toughened safety glass. Front window made in laminated glass 4+4mm electrically driven, 1° slope for optimum ergonomic worker posture. Lighting on working surface by means of fluorescent lighting fitted in non-contaminated area. Minimum level of lighting 1.000 lux. Construction structure in steel epoxy-polyester powder coated, resistant to the most common industrial disinfectants. Ventilation system by means of n°1 motor blower dedicated to the one-way airflow in the working chamber, equal to 70% of the total involved air and to exhaust the remaining 30%. The motor blower is centrifugal type, direct driven motor with double aspiration and protection factor IP55. Air filtration, both recirculate and exhaust air by means of H14 HEPA filters with efficiency 99,995% MPPS as per EN 1822. Both filters are tested with scanning method for integrity with DOP/DOS test. Protection grid, for main HEPA filter made by anodized aluminium. UV germicidal lamp on back stainless steel panel. Electrical data: 230V - 50Hz Command and Controls: Air ventilation control by means of automatic regulation of the revolution velocity of the motor blower. One high-resolution flow rate volumetric device, directly interfaced to microprocessor, achieves the automatic regulation. The microprocessor guarantees the activity of the motor blower and controls the optimal function even in presence of effects caused by progressive clogging of the HEPA filters. Alarm device optical (red signal light visible from working position and display message) and acoustic (buzzer) type, activated, at real time, by the microprocessor, showing the kind of alarm on a wide alpha numeric display. Standard features: •Fluorescent lighting •Power socket 4A, IP 55 (internal back panel-right side). •DOP/DOS 100% test inlet hose-barb port (internal under worktop - left side) •3 holes (19 mm diameter) on both side windows (for fluid taps installation or other connections) with plastic caps. •UV germicidal lamp 30 W on back stainless steel panel wavelength 253.7 nm (UV-C). Accessories: Perforated worktop for VBH & BioBan 48 C – 01Pc Solid worktop for VBH & BioBan 48 C – 01Pc Floor stand for Powder Safe & BioBan 48 – 01Pc Extra power socket German type – 01Pc Extra power socket French type – 01Pc Extra power socket British type – 01Pc Extra power socket Swiss type – 01Pc Manual fuel gas tap with safety solenoid valve – 01Pc Manual compressed air tap – 01Pc Manual vacuum tap – 01Pc Manual nitrogen tap – 01Pc Extra power socket French type – 01Pc Chest of three drawers on wheels – 01Pc SUPPORT FOR DRAWERS – 01Pc Thimble for for air extraction outside the building – 01Pc

Blood / Fluid warming carrier

Model:  S-line

Make:  Barkey GmbH & Co. KG

Country of Orgin: Germany

Controlled warmth for patients and infusions

Integrated transport handle

Language choice

Clear display with easy-to-follow messages

Display of the connected warming devices individual per channel

Permanent display of the pre-set and actual temperature values of the connected warming devices

User safety through preset maximum values of the warming devices

Combined stand and standard rail mounting

Integrated self-test

Optical and acoustic alarm signal in case of fault

Specification:

Weight   :  approx. 3,7 kg

Set temperature:  38.5ºC at system starts, adjustable upto max. 41ºC dependent on the connected warming device

Mains supply                        :   230 Volt, 50 Hz

Power consumption            :  200 Watt

Blood Bank Refrigerator

Make: Angelantoni life science srl

Country of Origin: Italy

Feature:

• Construction - Zinc plated steel self bearing body. - Service door, in special anodized aluminum profile with triple glass sealed under vacuum and anti-condensate electric heaters. - Automatic block system when the door is open more than 90° C. - Assembled on spheres for easy moving and front adjustable feet. - Port hole with a rubber stopper. - Internal chamber: Made of stainless steel AISI 304; rounded corners for easy cleaning. , Insulation Thickness: 75 mm and Low energy consumption cabinets. • Cooling System - Special execution to operate at an ambient temperature up to 40 ° C, - Very silent hermetic compressor in the upper part of the cabinet - Air-cooled condenser - Copper tube - Complete with electric fan with horizontal airflow. • Indoor Air Handling - By internal evaporator with forced ventilation, anchored to the ceiling inside of the cabinet. - The evaporator should be made in copper tube and the water collection basin in aluminum with stainless steel cover. - Ventilation should be provided by two electric motors (protection class IP44). - Electrical defrost resistance inserted in the pack evaporator allowing a fast defrosting . - Control probe (IP68 protection:) to the temperature inside the evaporator and the departure of the fans. • Blood Bag Storage Shelves: - Minimum 8 Nos. sliding and extractable drawer like shelves. - The drawer like shelves should be complete with stainless steel sliding guides and plastic wheels. - The front part of the drawers should be made with a PVC face plate for inner visibility - Inner light: Fluorescent lamp encased in a left side wall of the structure with automatic switch at door opening or by button on the control panel. • Temperature chart recorder: Circular weekly chart with battery. Scale: from +30 ° C to -30 ° C. • Regulation And Control System - Consists of a control panel, positioned on the upper part of the front side (above the respective compartment) - Realized through the new electronic system microprocessor - Divided into two sections independent from each other respectively for i) Temperature control and regulation. ii) Management of the alarm system. - Electronic system should be interfaced through a membrane keypad and digital display complete with on / off switch and line fuses. - The control panel should be complete with the following functions and / or alerts:  ON / OFF room, with indicator light.  ON / OFF interior lighting, with indicator light.  Control for manual defrost and signaling for automatic defrost.  Commands for setting the temperature.  Control for ON / OFF electric alarm system with indicator light.  Commands for setting the alarm system.  Command for silencing of audible and visual alarms (Buzzer).  Command to TEST the alarm system.  LED ON during cooling (compressor running).  LED indicator for network.  LED for minimum and maximum temperature alarms.  LED general alarm condition.  LED indicator for battery OFF.  LED for blackout.  Bright digital display for temperature / alarm set (decimal value).  Backlit display for digital indication of set temperature.  Coded alerts for probes failure. • Alarm System: - Electronic alarm system, audible and visual, independent from command and control system, for: - Power failures. - Backup battery inefficiencies. - Alarm memory (once the normal operation of the equipment is restored). - Minimum and maximum temperature. - Output for connection to remote alarm (dry contact with a maximum current of 2 A / 250 V); • No. 3 contacts: common, normally open and normally closed. Coded alarms for sensor failure. • The values of maximum and minimum alarm should be set from the control panel. • Should operate independently with its own automatically rechargeable 12 volt battery. • Upgradeable to connect Blood management system Specifications: • Capacity: min. 350 bags (of 450 ml). • Top Shelf working height : 1850 mm max • Operating temperature: +4 ° C • Current consumption: 5.5 A max • Heat Dissipation: 0.21 kcal / h • Noise level: about 43 db measured in front of the source at a distance of 1 meter • Power supply: 230 V + 6% -10% / 1/50 Hz Accessories: a. Kit for Chart Recorder – 1 b. Partition Screen Set for bag storage – 1 c. Compatible Voltage Stabilizer

Blood Collection Monitor

Model: Bagmatic NOVO

Make: Lmb Technologie GmbH

Country of Orgin: Germany

Features:

    Best choice for field applications (battery driven, with no need for electricity)

    8 hours of independent work, more than 150 donations autonomy

    3-dimensional mixing of the blood donation

    OLED display with easy menu navigation

    Maximum and minimum flow detection ensures smooth treatment of the product

    Visual indication of error / warning / donation status

    Wireless connection for data transfer (option)

    USB plug for data collection

    SD card data storage

    Powerful PC software ERYSYS for configuration of the device, data collection and analysis (option)

    PC software for collecting and exporting data (BNC)

Technical data:

    Power Supply            :  220VAC, 50Hz

    Battery : 12 V DC

    Battery charging time : 8 hours approx.

    Including battery charger

Blood/Fluid warmer for 1/2 Patient simultaneously

Make:  Barkey GmbH & Co. KG

Country of Orgin: Germany

CO2 Incubators      

Model: 170L

Make: Angelantoni life science srl

Country of Origin: Italy

Co2 Cell Culture Incubator 170L Silver Co2 Cell Culture Incubator Features:

    Optimum chamber environment, profiled heating creates gentle circulation –no fan or HEPA filter.

    Seamless chamber, with rounded interior corners makes cleaning easy.

    Removable shelves are non-tip.

    Sealed inner glass door allows chamber viewing.

    Temperature range programmable from 4 °C above ambient to 50 °C.

    Infrared CO2 Sensor, with auto self-referencing function.

    CO2 range programmable from 0.2 to 20 %.

    Large, easy to read LCD display with LED backlight.

    Removable, seamless, stainless steel humidity reservoir.

    25mm access port for cable pass-through etc.

    HEPA filtration for all incoming gasses.

    Large range of options allows you to configure each incubator for each task.

    Optional data capture and reporting for QA and verification purposes.

    3 Year Warranty (extendable).

Control System Safety Features Include:

    Independent over temperature cut-out.

    Calibration and programmed data internally backed up to guard against loss.

Compo Scale

Make: Lmb Technologie GmbH

Country of Orgin: Germany

Cryo Bath

Make: Lmb Technologie GmbH

Country of Orgin: Germany

Donor Station

Model: XYZ

Make: Lmb Technologie GmbH

Country of Orgin: Germany

Owing to the rich industrial experience and expertise in this business, we are involved in providing Blood Donor Couch. Size 210 x 67 x 60 cm Voltage 230 V Power Consumption 100/150 W Movement By Actuator

Growth Chamber

Model: EKOCT - EKOCTL - EKOCH - EKOCHL Series

Make: Angelantoni life science srl